The Tetraliner manure tanker is specially designed to transport high volumes from the farm to the field in order to supply your furthest spreading tankers. Available with a capacity from 21,000 l to 28,000 l, this machine is a high-performance and economical implement for all your manure spreading work. Your specialised spreading tanker can remain on the field while the Tetraliner ensures its supply. Equipped with "truck” type wheels or wider wheels (optional), it is characterised by its versatility during transport, regardless of the conditions or the nature of the terrain: asphalt road or path, the Tetraliner goes everywhere!
Theoretical capacity of the tank without recessing Theoretical capacity (l)
21.055
23.500
Theoretical capacity of the tank with recessing Theoretical capacity (l)
/
/
Standard pump
MEC8000/D
MEC8000/D
Standard axle
ADR2X150X1950-10G
ADR2X150X1950-10G
Brake drum
420X180
420X180
Maximum Ø of the wheels allowed on the vehicle
1244
1244
Type of standard parking stand
/
/
Tank diameter
1900
2000
(1) Pay attention to the maximum weight allowed to a loaded vehicle according to the legislation of the country. (5) WARNING: the nominal volume (tanker type) is an indication of the capacity that is close to the tank volume in “naked” configuration and it can never be considered as the effective volume. The effective volume may more or less vary according to the equipment (recess, pre-equipment, etc.).
Triple axle
Model
21000RL
23500RL
26000RL
28000RL
Manure tanker reference
4667V-20
4990V-20
4991V-20
4992V-20
Legend
(1)
(1)
(1)
(1)
Model of the tanker
21000RL
23500RL
26000RL
28000RL
Theoretical capacity of the tank without recessing Theoretical capacity (l)
21.055
23.500
26.000
28.000
Theoretical capacity of the tank with recessing Theoretical capacity (l)
/
/
/
/
Standard pump
MEC8000/D
MEC8000/D
MEC8000/D
MEC8000/D
Standard axle
BPW3X150X2150-10G
BPW3X150X2150-10G
BPW3X150X2150-10G
BPW3X150X2150-10G
Brake drum
410X180
410X180
410X180
410X180
Type of standard parking stand
Hydr.
Hydr.
Hydr.
Hydr.
Tank diameter
1900
2000
2100
2200
(1) Pay attention to the maximum weight allowed to a loaded vehicle according to the legislation of the country. (5) WARNING: the nominal volume (tanker type) is an indication of the capacity that is close to the tank volume in “naked” configuration and it can never be considered as the effective volume. The effective volume may more or less vary according to the equipment (recess, pre-equipment, etc.).
“Self-supporting” means that the chassis and the tank of the Tetraliner form one single structure. This type of construction allows the centre of gravity to be kept as low as possible, while maintaining a large clearance for the running gear suspension. Another advantage is the considerable reduction in the empty weight of the vehicle and the logical increase in the legally permissible load.
Road Running Gear
The "T" type Tetraliner is equipped as standard with a "leaf suspension" of the axles for a stable road holding and a certain traction ease. The galvanised “V-shaped open” drawbar is usually hitched in high position (approx. 1 m above the ground) to the tractor. The “RL” type Tetraliner is standard fitted with an air suspension of the axles, just like the one on truck trailers. This suspension provides an exceptional driving comfort, even at high speed (up to 60 km/h). The Tetraliner RL is also standard equipped with a fixed drawbar on a turntable (“Dolly” drawbar). The rear pivot point ensures that the drawbar transfers load, and therefore weight, to the back side of the tractor: nothing better for a good traction in difficult conditions! In both configurations, the Tetraliner is not limited regarding the steering angle and can therefore take sharp bends. With the agricultural wheels, it can reach fields to be spread via paths that cannot be accessed by trucks. With wheels up to 570 mm wide and a diameter up to 1,250 mm, this vehicle will pass where the limit of road wheels is reached.
High Maneuverability
This road vehicle with low centre of gravity is very maneuverable thanks to the standard turntable and the standard rear free steering axle on the RL version (option on T version). Whether it travels at low speed for delicate maneuvers or at high speed (up to 60 km/h depending on the national requirements of the countries) on tracks or roads, it is the ideal transport implement to meet all logistical needs.
Pump System
The Tetraliner manure tanker can be equipped with a vacuum pump or a volumetric lobe pump. The vacuum pump is fitted in the “V-shaped” drawbar in order to protect it from any accidental contact with the tractor wheels. The lobe pump is placed at the back of the tank and has a hydraulic drive. Next to an efficient pump system, the comfort of use and the machine specifications can further be improved thanks to specific modules for a filling or unloading arm (“JUMBO” front arm on the left/right, unloading arm, etc.).
Even More Versatile
The Tetraliner manure tanker can be fitted with various pieces of pre-equipment to easily adapt to many options, either at the time of the order or later as kits to be fitted afterwards (even years after the machine left the factory). Among the most interesting options, you can find: an upper filling access, a mixer inside the tank to homogenise the liquid during transport, plus many more!
Manufactured according to EN707 and CE/97/23 standards
4 m PVC pipe (Ø 6")
Hose carrying mudguards
6-spline Walterscheid P.T.O.-shaft
Perrot couplings
Exact scatterer
LED double truck-type lights (LED only available for brake and main-beam lights)
Wheels: 400R22.5 cover
Specific equipment
Integrated structure with front axle on revolving plate, Ø 8" drain cap with quick opening (stone trap) underneath the tank
Pre-equipment for filling from the right / left side and for turbo-filler (Ø 8" flanged outlet in the middle under the tank)
Pre-equipment for filling from the back (Ø 8" flanged outlet at the back under the tank)
Air brakes
Rear bumper
Specific equipment For T model
Leaf suspension of the axles (Tandem type) (wheel base of the rear axles: 1.350 mm)
Spring holding drawbar in high position
Ø 40 mm welded flat eyelet
Specific equipment for RL model
Air suspension of the axles (wheel base of the rear axles: 1.820 mm)
Braking power in proportion to the load
Rear free steering axle with hydraulic locking (DA) and shock absorber(s) (WARNING: the free steering axle must be locked as soon as you reach 15 km/h)