Stock #  A38

Joskin TRANS-SPACE 6500/7000/7500/8000

Videos
Call for Price
Overview
The traditional all-purpose dump trailer in XL version
Specifications

Volume (m³)
18 → 26

Axle(s)
Double axle
Triple axle

Range
Monocoque Dump Trailers

General Points

The Trans-SPACE agricultural dump trailers are the bestsellers in XL version in the JOSKIN range of monocoque dump trailers. Available with a double axle (from 18 t to 22 t technically permissible payload) or a triple axle (from 24 to 26 t technically permissible payload), they have a standard capacity from 21.90 m³ DIN to 30,80 m³ DIN. As an option, aluminium extensions of 25 cm, 50 cm, 75 cm or 100 cm, allow to significantly increase the volume in order to get at any time a XXL transport trailer. The Trans-SPACE monocoque dump trailers can have side walls of 125 cm, or 150 cm high. The 9200/30TRC150 model even combines both body heights in one model. This combination is ideal when using a conveyor (e.g. for the potato harvest). Enough to adapt to all kinds of uses!

 

Specifications
Model
TRANS-SPACE
Year
2024
Sale Type
New
Manufacturer
Joskin
models

DOUBLE  AXLE

Model
6500/22BC150 7000/23BC150 7500/25BC150
Trailer reference
4628-20 4630-20 4632-20
Legend / / /
Model of the trailer (1)
6500/22BC150 7000/23BC150  7500/25BC150
Body volume of the trailer
21,90 23,50 25,10
Technically permissible payload
18 20 22
Inside body length
Inner body dimensions (m)
6,39-6,73 6,87-7,20 7,34-7,68
Inside body width
Inner body dimensions (m)
2,18-2,26 2,18-2,26 2,18-2,26
Inside body height
Inner body dimensions (m)
1,50 1, 50 1,50
Capacity of the tipping ram
44 62 62
Standard axle
ADR2X130X2100-10G ADR2X130X2100-10G ADR2X150X2100-10G
Brake drum 406X120 406X120 420X180
 (1) The first 4 figures refer to the average length (in mm), the next 2 ones to the DIN volume (in m³) without extensions and the last 3 ones to the height of the monocoque body (in cm).
(2) Body of 1,50 m high on the right and 1,25 m high on the left with 50-cm hydraulic extension (limited to 25 cm without extension)

 

TRIPLE  AXLE

Model
7500/25TRC150 8000/27TRC150 9200/25TRC125 9200/30TRC150 9200/30TRC150
Trailer reference
4634-20 4636-20 4842-20 4976-20 4843-20
Legend / / /    
Model of the trailer (1)
7500/25TRC150 8000/27TRC150 9200/25TRC125 9200/30TRC150 9200/30TRC150
Body volume of the trailer
25,10 27,40 26,00 30,80 30,80
Technically permissible payload
24 26 26 26 26
Inside body length
Inner body dimensions (m)
7,34-7,68 8,08-8,41 9,08-9,41 9,08-9,41 9,08-9,41
Inside body width
Inner body dimensions (m)
2,18-2,26 2,18-2,26 2,18-2,26 2,18-2,26 2,18-2,26
Inside body height
Inner body dimensions (m)
1,50 1, 50 1,25 1,25-1,50(2) 1, 50
Capacity of the tipping ram
70 70 70 70 70
Standard axle
ADR3X150X2100-10G ADR3X150X2100-10G ADR3X150X2100-10G ADR3X150X2100-10G ADR3X150X2100-10G
Brake drum 420X180 420X180 420X180 420X180 420X180
 (1) The first 4 figures refer to the average length (in mm), the next 2 ones to the DIN volume (in m³) without extensions and the last 3 ones to the height of the monocoque body (in cm).
(2) Body of 1,50 m high on the right and 1,25 m high on the left with 50-cm hydraulic extension (limited to 25 cm without extension)

 

 

 

features
ALPINA2 Narrow Machine

Design/Chassis

The chassis of the JOSKIN Trans-SPACE tipping trailers is 900 mm wide and can therefore be fitted with wide wheels. It is made of profiles tubes of 300 x 100 x 8 mm on models 6500 and of 300 x 100 x 10 mm on the other versions. The Trans-SPACE is fitted with a narrow “arrow-shaped” drawbar providing a high sturdiness and a high steering angle. Furthermore, its wide fixing points (same width as the chassis) further improve the maneuverability. This solution offers a straight pull/push line and a large vertical clearance at the eyelet and thereby also absorbing shocks. Please note that the drawbar has a cross-suspension ensuring the driving comfort of the whole carriage.

ALPINA2 Narrow Machine Tapered, Light and Strong Body

The bodies of the Trans-SPACE tipping trailers are made of a 4-mm thick floor sheet in HARDOX 400 and two 4-mm thick side sheets in high tensile steel. The upper strip is reinforced to resist any accidental impact during loading and to guarantee the rigidity of the body, even with heavier loads. The Trans-SPACE bodies are available in 3 heights: 125 cm, 150 cm, as well as a combination of 125 cm and 150 cm for the Trans-SPACE 9200/30TRC150 special model for potatoes. As an option, they can be easily fitted with full aluminium grain extensions ( 25 cm, 50 cm, 75 cm or 100 cm), micro-perforated silage extensions ( 50 cm or 75 cm) or extensions with rods (25 cm). The manufacturing process of this tipping trailer not only of this tipping guarantees top quality, but also ensures that the body is perfectly tapered. All Trans-SPACE bodies are indeed 8 cm wider at the back in relation to the front, thus ensuring a complete and fluid emptying. The Trans-SPACE bodies with 125 cm-high side walls are standard fitted with 4 large sight windows of 21 x 38 cm and those with 150-cm high side walls with 4 XL sight windows of 21 x 63 cm, so you always have a good view over the load! At the back, the Trans-SPACE tipping trailers are equipped with a 1-part door with central grain chute (50 x 50 cm) and hydraulic control. The door guarantees a perfect tightness thanks to its mechanical closing safety device and the wide industrial seal in a high-quality guide groove.

ALPINA2 Narrow Machine

Safe Tipping

The telescopic hydraulic tipping ram is assembled on a double oscillating frame fitted with greased bearings and integrated in the chassis in a forward position. This system compensates the torsions due to the tipping strains and effectively protects the hydraulic ram and the body from distortions. The advanced position of the hydraulic ram also makes it quicker and easier to tip heavy loads. The back- and and upward position of the tipping hinges increases the unloading height. The standard safety valve, which is directly placed on the hydraulic tipping ram, prevents the body from unexpectedly falling down (e.g. when a hydraulic hose breaks). The first two elements of the hydraulic tipping ram are as a standard chromed. This anti-rust protection allows the body of the tipping trailer to be left tilted backwards, especially during the resting time on a harvesting site, without the risk of rust pitting. As an option, it is possible to add a P.T.O.-shaft driven hydraulic tipping pump with or without lowering control. The hydraulically operated rear door is opened by actuating a double-acting tractor distributor and closed by means of a mechanical side lock. This system allows a perfect tightness of the JOSKIN tipping trailers, even with small grains.

ALPINA2 Narrow Machine Running Gear

All double-axle Trans-SPACE tipping trailers are standard equipped with a Roll-Over bogie – a movable bolted running gear with up to 24 cm clearance (except Trans-Space 7500: Hydro-Tandem running gear). This feature is particularly interesting because it allows to modify the weight on the eyelet, and thus on the back side of the tractor, especially when changing the tyres or the drawbar height. The Roll-Over bogie with parabolic leaves is characterised by its large ground clearance, which is ideal for works on the fields as well as for a good driving comfort. All triple-axle Trans-SPACE tipping trailers (from model 7500) are standard fitted with a Hydro-Tridem running gear, including both a hydraulic axle suspension (clearance: +/- 24 cm) and a double self-steering system (first and last axles), as well as a front lifting axle (for travels with empty vehicle). They are also standard fitted with a tipping stabiliser, which secures the trailer on the ground during the tipping operations.

ALPINA2 Narrow Machine Even More Versatile

All JOSKIN Trans-SPACE tipping trailers are standard equipped with various pieces of pre-equipment to easily add various options, either at the time of the order or later (even years after the purchase). Among the most interesting options, you can find: aluminium or steel extensions, covering systems (covers, nets, etc.), a high-tipping or 2-way tipping system, a transfer auger, a 2-part door, plus many more!

 

 

special features

Standard equipment

  • Tapered monocoque body
  • Automated welding and cutting
  • Standard manufactured in special steel
  • 4 mm floor in HARDOX 400, 4 mm side walls in high tensile steel
  • 4 sight windows with perspex closing plate:
  • - 21 cm wide and 38 cm high on 1,25 m body
  • - 21 cm wide and 63 cm high on 1,50 m body
  • 1-part hydraulic door (DA)
  • Door hydraulic rams integrated into the arm
  • Central grain chute (500 x 500 mm)
  • Bolted mudguards
  • Galvanized front ladder
  • Pre-equipment for cover
  • Pre-equipment for front platform
  • Cross-suspension drawbar with parabolic leaves
  • JOSKIN Ø 80 mm 3 T bolted knee-joint eyelet (large plate)
  • Chassis width: 900 mm
  • Chassis made up of profile tubes:
  • - 300 x 100 x 8 mm on model 6500
  • - 300 x 100 x 10 mm on models 7000 - 9200
  • Hydraulic skid with direct connection to the tractor (DA)
  • Door opening and hydraulic skid on one single distributor with manual 6-way valve
  • Oil-fed tipping
  • Double oscillating frame for hydraulic tipping ram
  • Air brakes
  • Rear bumper
  • LED double truck-type lights on oscillating frame (LED only available for brake and main-beam lights)
  • Shot-blasting before painting
  • Primer Ester Epoxy (2 K) + finishing lacquer (2 K) (total 100 µ)
  • Forced drying (60°C oven)
  • Wheels: 400R22.5 cover

Specific equipment Trans-CAP BC

  • JOSKIN Roll-Over bogie with bolted table
  • Parabolic leaves: 1.600 mm

Specific equipment Trans-SPACE 7500 BC

  • Hydro-Tandem: hydraulic axle suspension with 1.550 mm wheel base - manual height adjustment - increase of max. total load (see ref. 1775)
  • Self steering axle with hitching yoke, including quick coupling to the tractor and aligning set-up unit including: 2 nitrogen accumulators, oil tank, hand pump and pressure gauge
  • Tipping stabilizer

Specific equipment Trans-SPACE TRC

  • Hydro-Tridem: hydraulic axle suspension with 1.550 mm wheel base (1.820 mm on 9200) - manual height adjustment
  • Double self-steering system (first and last axle) with hitch yoke, including quick coupling to the tractor and aligning set-up unit including: 2 nitrogen accumulators, oil tank, hand pump and pressure gauge
  • Tipping stabilizer
  • Front lifting axle (DA)
  • Thermoplastic mudguards

 

Videos

Videos

Documents