Joskin Drakkar 6600/7600/8600/9600 Dbl.Axle/Tri-Axle
|
|
Specifications
Model |
Drakkar
|
Year |
2024
|
Stock Number |
B31
|
Sale Type |
New
|
Manufacturer |
Joskin
|
Quantity |
1
|
Manufacturer Qty |
0
|
Price |
Contact for price CAD
|
Odometer |
km
|
|
|
|
Description
Drakkar Multi-Purpose Trailers with moving belt floor |
Specifications |
Volume (m³)
18 → 28
|
Axle(s)
Double axle
Triple axle
|
Range
Multipurpose trailers |
General Points
Considered as the multi-talent in the JOSKIN range, the Drakkar is a multipurpose trailer for the transport of many different types of material: silage, grains, pulp, beets, potatoes, etc. Thanks to its clean and very fast unloading system, with a conveyor belt and a moving front wall, the material is supported without being damaged, while the body is perfectly stable during the use. Its low weight is due to the synthetic side walls (UV-resistant Polyfont), which allows to transport a maximal payload. Furthermore, its running gear ensures a perfectly stable driving performance, whatever the terrain type.
|
|
|
MODELS
|
Models
DOUBLE AXLE
Model
|
6600/21D150 |
6600/28D180 |
7600/27D150 |
7600/33D180 |
8600/31D150 |
8600/37D180 |
DRAKKAR reference |
4958-20 |
4945-20 |
4959-20 |
4941-20 |
4960-20 |
4937-20 |
Legend |
/ |
/ |
/ |
/ |
/ |
|
|
6600/21D150 |
6600/28D180 |
7600/27D150 |
7600/33D180 |
8600/31D150 |
8600/37D180 |
Volume of the DRAKKAR body
Volume (m3)
|
23 |
28 |
27 |
33 |
31 |
37 |
DRAKKAR body volume with 300 mm dome
Volume (m3)
|
26 |
31 |
30 |
36 |
34 |
41 |
Technically permissible payload
|
18 |
18 |
22 |
22 |
22 |
22 |
Inside body length
Inner body dimensions (m)
|
6,30-6,70 |
6,30-6,70 |
7,30-7,70 |
7,30-7,70 |
8,30-8,70 |
8,30-8,70 |
Inside body width
Inner body dimensions (m)
|
2,34-2,38 |
2,34-2,38 |
2,34-2,38 |
2,34-2,38 |
2,34-2,38 |
2,34-2,38 |
Body height
Inner body dimensions (m)
|
1,50 |
1,80 |
1,50 |
1,80 |
1,50 |
1,80 |
|
ADR2X130X2100-10G |
ADR2X130X2100-10G |
ADR2X150X2100-10G |
ADR2X150X2100-10G |
ADR2X150X2100-10G |
ADR2X150X2100-10G |
Brake drum |
406X120 |
406X120 |
420X180 |
420X180 |
420X180 |
420X180 |
|
|
TRIPLE AXLE
Model
|
8600/31T150 |
8600/37T180 |
9600/37T150 |
9600/41T180 |
|
4961-20 |
4938-20 |
4962-20 |
4943-20 |
Legend |
/ |
/ |
/ |
/ |
|
8600/31T150 |
8600/37T180 |
9600/37T150 |
9600/41T180 |
Volume of the DRAKKAR body
Volume (m3)
|
31 |
37 |
35 |
41 |
DRAKKAR body volume with 300 mm dome
Volume (m3)
|
34 |
41 |
38 |
46 |
Technically permissible payload
|
28 |
28 |
28 |
28 |
Inside body length
Inner body dimensions (m)
|
8,30-8,70 |
8,30-8,70 |
9,30-9,70 |
9,30-9,70 |
Inside body width
Inner body dimensions (m)
|
2,34-2,38 |
2,34-2,38 |
2,34-2,38
|
2,34-2,38
|
Body height
Inner body dimensions (m)
|
1,50 |
1,80 |
1,50 |
1,80 |
Standard axle |
ADR3X150X2100-10G |
ADR3X150X2100-10G |
ADR3X150X2100-10G |
ADR3X150X2100-10G |
Brake drum |
420X180 |
420X180 |
420X180 |
420X180 |
|
|
|
|
FEATURES
|
Features
Drakkar's Revolutionary System
The Drakkar has an industrial hermetic conveyor belt that moves the material during the unloading operation. This high-resistance conveyor belt is rolled up on a cylinder driven by 2 hydraulic engines at the back of the tapered trailer body (+ 4 cm at the front). During unloading, the front wall, together with the conveyor belt, moves backwards to accompany the material without compressing it. At the end of the operation, it can have a pushing effect resulting in compact and firm heaps, if the user wishes to. The transparent perspex plate (10 mm thick) on the front wall ensures an excellent visibility when loading and unloading. The floor and the wall resume their initial positions thanks to a hydraulic engine at the front of the trailer, which is connected to a system with a yaw chain. This revolutionary system therefore allows a safe unloading without dumping, even inside buildings, without compressing the transported material. The emptying speed of the Drakkar is optimised to less than 1 minute with any type of product. At the end of the emptying process, the driver only makes the conveyor belt go one meter back while closing the door, before returning to the field. With a simple impulse, the conveyor belt will return automatically to the front position to receive a new load.
|
A Rear Door with Large Clearance
The trailer is unloaded easily and without blocking thanks to the significant clearance (40 cm) of the rear door (operated by two double-acting rams) above the body. A locking device on the hydraulic cylinder makes sure the door is perfectly closed and avoids any unexpected opening during transportation. A "stop" sensor on the door allows the conveyor belt to start moving only when the door is fully open. In some situations, it is possible to leave the door closed to empty through the standard grain chutes (3 grain chutes of 60 x 27 cm) or to only slightly open it. To that end, there are two control boxes at the back of the vehicle to progressively make the conveyor belt move forward or backward. A thick seal of industrial quality is fitted around the back of the Drakkar to provide a perfect tightness.
|
Industrial Scrapers
The rear (upper and lower) scrapers remove any remaining material on the moving floor. The one at the front prevents foreign material to accumulate between the floor and the conveyor belt. Large side scrapers ensure that the body is tight for all types of products.
|
Comfort and Standard Suspensions
All Drakkar are standard equipped with a drawbar suspension. On double-axle models, it is mechanical with a bundle of cross leaves between the drawbar and the chassis to perfectly absorb shocks or movements. On triple-axle models, the suspension is secured by two double-acting hydraulic cylinders with two large-capacity nitrogen accumulators. The control box in the cab allows to modify the body slope. It is therefore ideal for your work on headlands, on heaps or simply to transfer extra weight to the rear axle of the tractor, especially in difficult harvesting conditions. All double-axle Drakkar are standard equipped with a bolted Roll-Over running gear. This concept, which is characterised, among other things, by parabolic suspension leaves underneath the axle square, guarantees an upward traction line and therefore a perfect traction ease. The triple-axle Drakkar are equipped standard with a Hydro-Tridem running gear, with a 24-cm clearance and a perfect load distribution for a maximum stability.
|
Even More Versatile
All Drakkar are standard fitted with various pieces of pre-equipment to easily add various options, either at the time of the order or later (even years after the purchase). Among the most interesting options, you can find: Duo-Cover nets or hermetic covers, hydraulic extensions, transfer augers, hydraulic drop sides, plus many more!
|
|
SPECIAL FEATURES
|
Special_Features
Standard equipment
- Tapered body with steel posts, and side walls with UV-resistant Polyfont panels
- Mobile sloping front wall with steel posts and perspex closing plate
- Moving floor of the conveyor belt type, driven by 2 hydraulic motors (min. 70 l - max. 100 l/min at 180 bar) with hydraulic unloading assistance
- Electro-hydraulic control including the entry block with LS signal amplifier, the control of the conveyor belt, door and bumper through the control box in the cabin
- Push-button in the cab and at the back of the vehicle allowing the conveyor belt to move forward when the door is closed
- Hydraulic rear steel door
- 3 grain chutes (600 x 270 mm)
- Tubular chassis (250 x 100 x 6 mm)
- JOSKIN Ø 80 mm 3 T bolted knee-joint eyelet (large plate)
- Drawbar with cross-springs (except on triple-axle model)
- Only low hitching
- Hydraulic skid (DA) with direct connection to the tractor
- Air brakes
- Hydraulically retractable bumper (1 DA)
- LED double truck-type lights on oscillating frame (LED only available for brake and main-beam lights)
- Thermoplastic mudguards
- Wheels: 400R22.5 cover
|
Specific equipment double-axle
- JOSKIN Roll-Over bogie (wheel base: 1.600 mm) with bolted table
|
Specific equipment for double-axle 7600D
- Rear free steering axle with hydraulic locking (DA - direct on tractor) (CAUTION: the free steering axle must be locked as soon as you reach 15 km/h)
|
Specific equipment for double-axle model 8600D
- Colour screen integrated in the alu box to display the unloading assistance control and the conveyor belt regulation
- Hydro-Tandem: hydraulic axle suspension with 1.820 mm wheel base - manual height adjustment
- Rear self steering axle with hitch yoke, including quick coupling to the tractor and aligning set-up unit including: 2 nitrogen accumulators, oil tank, hand pump and pressure gauge
|
Specific equipment for triple-axle model
- 3 extra electrohydraulic functions on the machine for the hydropneumatic drawbar, front lifting axle and 1 free function for the cover or hydraulic extension with aluminium box (SA + FR)
- Colour screen integrated in the aluminium box to display the unloading assistance control and the conveyor belt regulation
- Double self-steering system (first and last axle) with hitch yoke, including quick coupling to the tractor and aligning set-up unit including: 2 nitrogen accumulators, oil tank, hand pump and pressure gauge
- Hydro-Tridem: hydraulic axle suspension with 1.820 mm wheel base - including manual height adjustment
- Hydropneumatic drawbar suspension (2 nitrogen accumulators, suspension when vehicle loaded and unloaded)
- Front lifting axle
|
|