Joskin TRANS-KTP 17/22/27/34 - dbl.-axle/tri-axle

Tapered, Light and Strong Body

The JOSKIN Trans-KTP dump bodies are fully made of 6-mm HARDOX 450 high tensile steel (5 mm on 17/50) that has very interesting elastic characteristics. It returns to its original shape after deformation. Compared to traditional steel, the tensile limit is 5 times higher. All bodies are based on 2 steel sheets, without any linking cross-weld. Thanks to this manufacturing process, the empty weight of these dump trailers is significantly lower and therefore allows to transport higher payloads, without compromising on sturdiness. The tapered shape of the body (8 cm wider at the back) makes sure the contents of the trailer flow out freely. This unmatched property is further reinforced by the successive folds aiming at smoothing off the edges of the body.

Even More Versatile

All JOSKIN Trans-KTP dump trailers are standard equipped with various pieces of pre-equipment to easily add various options, either at the time of the order or later (even years after the purchase). Among the most interesting options, you can find: welded steel extensions (15 cm-25 cm), covering systems (covers, nets, doors), aluminium extensions to transport your harvests, the automatic lubrication, plus many more!

Safe Tipping

The multi stage dump cylinder is assembled on a double oscillating frame fitted with greased bearings and integrated in the chassis in a forward position. This system compensates the torsions due to the dumping strains and effectively protects the hydraulic ram and the body from distortions. The advanced position of the dump cylinder also makes it quicker and easier to dump heavy loads. The back- and upward position of the dump hinges increases the unloading height. The standard safety valve, which is directly placed on the dump cylinder, prevents the body from unexpectedly falling down (e.g. when a hydraulic hose breaks). The first two elements of the multi stage dump cylinder are standard chromed. This anti-rust protection allows the body of the dump trailer to be left tilted backwards, especially during the resting time on a harvesting site, without the risk of rust pitting.

Running Gear

All Trans-KTP 17/50, 22/50 and 27/55 dump trailers are standard fitted with a JOSKIN Cross-Over bogie running gear. Since the bogie table is bolted to the chassis, it can easily be moved horizontally if the event of a change of the hitching height or if one wishes to transfer load to the rear axle of the tractor. The Cross-Over bogie with parabolic leaves is characterised by its large ground clearance, which is ideal for works on construction sites as well as for a good driving comfort. As an option, this Cross-Over bogie can be replaced by a rocker beam (pendulum bogie), which follows the terrain relief perfectly and provides a maximal stability at any time. For those who are looking for a hydraulic running gear for even more comfort, JOSKIN offers its Hydro-Tandem and Hydro-Pendul (triangular system) systems. All triple-axle Trans-KTP 27/65 and 34/72 dump trailers are standard fitted with a Hydro-Tridem running gear, including a hydraulic axle suspension (clearance: +/- 240 mm), a double self-steering system (first and last axles), as well as a front lifting axle (for travels with empty vehicle).