Joskin Drakkar 6600/7600/8600/9600 Dbl.Axle/Tri-Axle

A Rear Door with Large Clearance

The trailer is unloaded easily and without blocking thanks to the significant clearance (40 cm) of the rear door (operated by two double-acting rams) above the body. A locking device on the hydraulic cylinder makes sure the door is perfectly closed and avoids any unexpected opening during transportation. A "stop" sensor on the door allows the conveyor belt to start moving only when the door is fully open. In some situations, it is possible to leave the door closed to empty through the standard grain chutes (3 grain chutes of 60 x 27 cm) or to only slightly open it. To that end, there are two control boxes at the back of the vehicle to progressively make the conveyor belt move forward or backward. A thick seal of industrial quality is fitted around the back of the Drakkar to provide a perfect tightness.

Industrial Scrapers

The rear (upper and lower) scrapers remove any remaining material on the moving floor. The one at the front prevents foreign material to accumulate between the floor and the conveyor belt. Large side scrapers ensure that the body is tight for all types of products.

Comfort and Standard Suspensions

All Drakkar are standard equipped with a drawbar suspension. On double-axle models, it is mechanical with a bundle of cross leaves between the drawbar and the chassis to perfectly absorb shocks or movements. On triple-axle models, the suspension is secured by two double-acting hydraulic cylinders with two large-capacity nitrogen accumulators. The control box in the cab allows to modify the body slope. It is therefore ideal for your work on headlands, on heaps or simply to transfer extra weight to the rear axle of the tractor, especially in difficult harvesting conditions. All double-axle Drakkar are standard equipped with a bolted Roll-Over running gear. This concept, which is characterised, among other things, by parabolic suspension leaves underneath the axle square, guarantees an upward traction line and therefore a perfect traction ease. The triple-axle Drakkar are equipped standard with a Hydro-Tridem running gear, with a 24-cm clearance and a perfect load distribution for a maximum stability.

Even More Versatile

All Drakkar are standard fitted with various pieces of pre-equipment to easily add various options, either at the time of the order or later (even years after the purchase). Among the most interesting options, you can find: Duo-Cover nets or hermetic covers, hydraulic extensions, transfer augers, hydraulic drop sides, plus many more!